How to Specify
|
Original Series 500 Water Level Monitor
|
How to Specify
|
|
|
An MC Products water level monitor shall be supplied,
consisting of a stainless steel sensor mounted in the water tank
and a display module mounted on the pump panel.
Specify tank depth & configuration (rectangular, T-tank, elliptical). Tank prints are
required for irregular shaped tanks
The control cable connecting the two units shall be RFI
shielded and have a PVC cover with Deutsch connectors.
Sensing unit to be constructed of corrosion resistant materials
For harsh or hard water conditions the Series 2000 is recommended.
Display module on pump panel will have incandescent
lamps (specify number 4 or 5) with colored lenses (specify color)
for superior visibility in direct sunlight, vertically aligned for instant
recognition of water level. Specify if a test button is required.
|
|